Bare Al2O3 Aluminum Oxide Circuit Board Pink Alumina Ceramic Substrate

• Application: Refractory, Structure Ceramic, Industrial Ceramic, Functional Ceramic
• Type: Ceramic Plates
• Forming Method: Tape Casting
• Purity of Material: 96%, 99.6% Alumina
• Features: High Mechanical Strength, Small Dielectric Loss
• Usage: Blank Ceramic Circuit Board
• Model NO.: JJBP-0111-0007
• Density: Over 3.70g/cm3
• Standard Thickness: 0.1-2.0mm Available
• Thickness Tolerance: ±0.03/0.05mm (Depending on Thickness)
• Material: Alumina Ceramic
• Transport Package: Individual Package
• Specification: Max. up to 500mm x 500mm
• Trademark: JingHui
• Origin: China
• HS Code: 8547100000

Product Description

Bare Al2O3 Aluminum Oxide Circuit Board Pink Alumina Ceramic Substrate

Product Introduction

 

The pink alumina ceramic substrate is to add Cr2O3 into Al2O3

ceramics, because the Cr3+ ions in the solid solution α-Al2O3 lattice

have a strong selective absorption of the blue-green color of visible

light, showing a blue-green complementary color, that is, pink.


Features of Our Pink Alumina Ceramic Substrates

(1) Good insulation performance and high reliability.

(2) Low dielectric coefficient and good high frequency

performance.

(3) Low thermal expansion coefficient (CTE) and high thermal

conductivity.

(4) Good air tightness, stable chemical properties, and strong

protection for electronic systems.
 

Product Parameters

Our pink alumina ceramic substrates are generally made of 96% or 99.6% alumina. For material properties, please refer to the table below.

Alumina Ceramic Substrate
Item	Unit		96% Al2O3	99.6% Al2O3
Mechanical Properties
Color	/	/	White	Ivory
Density	Drainage Method	g/cm^3	≥3.70	≥3.95
Light Reflectivity	400nm/1mm	%	94	83
Flexural Strength	Three Point Bending	MPa	>350	>500
Fracture Toughness	Indentation Method	MPa·m^1/2	3.0	3.0
Vickers Hardness	Load 4.9N	GPa	14	16
Young's Modulus	Stretching Method	GPa	340	300
Water Absorption		%	0	0
Camber	/	Length‰	T≤0.3: ≤5‰, Others: ≤3‰	≤3‰
Thermal Properties
Max. Service Temperature (Non-loading)	/	ºC	1200	1400
CTE (Coefficient of Thermal Expansion)	20-800ºC	1×10^-6/ºC	7.8	7.9
Thermal Conductivity	25ºC	W/m·K	>24	>29
Thermal Shock Resistance	800ºC	≥10 Times	No Crack	No Crack
Specific Heat	25ºC	J/kg·k	750	780
Electrical Properties
Dielectric Constant	25ºC, 1MHz	/	9.4	9.8
Dielectric Loss Angle	25ºC, 1MHz	×10^-4	≤3	≤2
Volume Resistivity	25ºC	Ω·cm	≥10^14	≥10^14
Dielectric Strength	DC	KV/mm	≥15	≥15

Applications

Production Process

Why Choose Us?

1. Our bare ceramic substrates are available in a wide variety of standard and custom thickness, shape, and size.

2. For products that require high dimensional accuracy, we can use various processing methods to process ceramic substrates, such as lapping, polishing, laser scribing, laser cutting, etc.

Our Manufacturing Capacity

1. Product Specification

Alumina Ceramic Substrate
99.6% Al2O3
Thickness (mm)	Maximum Size (mm)			Shape			Molding Technique
	As Fired	Lapped	Polished	Rectangular	Square	Round
0.1-0.2		50.8	50.8		√	√	Tape Casting
0.25		114.3	114.3		√		Tape Casting
0.38	120	114.3	114.3		√		Tape Casting
0.5	120	114.3	114.3		√		Tape Casting
0.635	120	114.3	114.3		√		Tape Casting
Other special thicknesses within the thickness range of 0.1-0.635mm can be achieved by lapping.
96% Al2O3
Thickness (mm)	Maximum Size (mm)			Shape			Molding Technique
	As Fired	Lapped	Polished	Rectangular	Square	Round
0.25	120	114.3	114.3		√		Tape Casting
0.3	120	114.3	114.3		√		Tape Casting
0.38	140×190			√			Tape Casting
0.5	140×190			√			Tape Casting
0.635	140×190			√			Tape Casting
0.76	130×140			√			Tape Casting
0.8	130×140			√			Tape Casting
0.89	130×140			√			Tape Casting
1	280×240			√			Tape Casting
1.5	165×210			√			Tape Casting
2	500×500			√			Tape Casting
Other special thicknesses within the thickness range of 0.1-2.0mm can be achieved by lapping.

2. Product Tolerances
 

Alumina Ceramic Substrate
Item	Substrate Thickness (mm)	Standard Tolerance (mm)	Best Tolerance (mm)	Laser Cutting Tolerance (mm)
Length and Width Tolerance	/	±2		±0.15
Thickness Tolerance	T<0.3	±0.03	±0.01
	0.30-1.0	±0.05	±0.01
	T>1.0	±10%	±0.01

3. Surface Roughness
 

Alumina Ceramic Substrate
Material	Surface Roughness (μm)
	As Fired	Lapped	Polished
96% Al2O3	Ra 0.2-0.75	Ra 0.3-0.7	Ra ≤0.05
99.6% Al2O3	Ra 0.05-0.15	Ra 0.1-0.5	Ra ≤0.05

4. Laser Processing

(1) Hole Size
 

Alumina Ceramic Substrate
Hole Diameter (mm)	Standard Tolerance (mm)
φ≤0.5	0.08
φ>0.5	0.2

(2) Laser Scribing
 

Alumina Ceramic Substrate
Substrate Thickness (mm)	the Percentage of Laser Scribe Line Depth to Thickness (%)
0.2-0.3	40%±5%
0.3<T≤0.5	50%±3%
0.5<T≤1.0	43%±3%
1.2	55%±3%
1.5	55%±3%
2.0	55%+10%
The scribing spot can be in different sizes. Generally there are small spot 0.03-0.04mm (Substrate Thickness≤0.5mm ) and large spot 0.08-0.1mm (Substrate Thickness>0.5mm), and the accuracy is ±0.01mm.