Customization: | Available |
---|---|
Application: | Electronic Devices, Lighting, Power Supply, Semiconductors |
Thickness: | Customized |
Still deciding? Get samples of US$ 5/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Our pink alumina ceramic substrates are generally made of 96% or 99.6% alumina. For material properties, please refer to the table below.
Alumina Ceramic Substrate | ||||
Item | Unit | 96% Al2O3 | 99.6% Al2O3 | |
Mechanical Properties | ||||
Color | / | / | White | Ivory |
Density | Drainage Method | g/cm3 | ≥3.70 | ≥3.95 |
Light Reflectivity | 400nm/1mm | % | 94 | 83 |
Flexural Strength | Three Point Bending | MPa | >350 | >500 |
Fracture Toughness | Indentation Method | MPa·m1/2 | 3.0 | 3.0 |
Vickers Hardness | Load 4.9N | GPa | 14 | 16 |
Young's Modulus | Stretching Method | GPa | 340 | 300 |
Water Absorption | % | 0 | 0 | |
Camber | / | Length‰ | T≤0.3: ≤5‰, Others: ≤3‰ | ≤3‰ |
Thermal Properties | ||||
Max. Service Temperature (Non-loading) | / | ºC | 1200 | 1400 |
CTE (Coefficient of Thermal Expansion) |
20-800ºC | 1×10-6/ºC | 7.8 | 7.9 |
Thermal Conductivity | 25ºC | W/m·K | >24 | >29 |
Thermal Shock Resistance | 800ºC | ≥10 Times | No Crack | No Crack |
Specific Heat | 25ºC | J/kg·k | 750 | 780 |
Electrical Properties | ||||
Dielectric Constant | 25ºC, 1MHz | / | 9.4 | 9.8 |
Dielectric Loss Angle | 25ºC, 1MHz | ×10-4 | ≤3 | ≤2 |
Volume Resistivity | 25ºC | Ω·cm | ≥1014 | ≥1014 |
Dielectric Strength | DC | KV/mm | ≥15 | ≥15 |
1. Our bare ceramic substrates are available in a wide variety of standard and custom thickness, shape, and size.
2. For products that require high dimensional accuracy, we can use various processing methods to process ceramic substrates, such as lapping, polishing, laser scribing, laser cutting, etc.
Our Manufacturing Capacity
1. Product Specification
Alumina Ceramic Substrate | |||||||
99.6% Al2O3 | |||||||
Thickness (mm) | Maximum Size (mm) | Shape | Molding Technique | ||||
As Fired | Lapped | Polished | Rectangular | Square | Round | ||
0.1-0.2 | 50.8 | 50.8 | √ | √ | Tape Casting | ||
0.25 | 114.3 | 114.3 | √ | Tape Casting | |||
0.38 | 120 | 114.3 | 114.3 | √ | Tape Casting | ||
0.5 | 120 | 114.3 | 114.3 | √ | Tape Casting | ||
0.635 | 120 | 114.3 | 114.3 | √ | Tape Casting | ||
Other special thicknesses within the thickness range of 0.1-0.635mm can be achieved by lapping. | |||||||
96% Al2O3 | |||||||
Thickness (mm) | Maximum Size (mm) | Shape | Molding Technique | ||||
As Fired | Lapped | Polished | Rectangular | Square | Round | ||
0.25 | 120 | 114.3 | 114.3 | √ | Tape Casting | ||
0.3 | 120 | 114.3 | 114.3 | √ | Tape Casting | ||
0.38 | 140×190 | √ | Tape Casting | ||||
0.5 | 140×190 | √ | Tape Casting | ||||
0.635 | 140×190 | √ | Tape Casting | ||||
0.76 | 130×140 | √ | Tape Casting | ||||
0.8 | 130×140 | √ | Tape Casting | ||||
0.89 | 130×140 | √ | Tape Casting | ||||
1 | 280×240 | √ | Tape Casting | ||||
1.5 | 165×210 | √ | Tape Casting | ||||
2 | 500×500 | √ | Tape Casting | ||||
Other special thicknesses within the thickness range of 0.1-2.0mm can be achieved by lapping. |
Alumina Ceramic Substrate | ||||
Item | Substrate Thickness (mm) | Standard Tolerance (mm) | Best Tolerance (mm) | Laser Cutting Tolerance (mm) |
Length and Width Tolerance | / | ±2 | ±0.15 | |
Thickness Tolerance | T<0.3 | ±0.03 | ±0.01 | |
0.30-1.0 | ±0.05 | ±0.01 | ||
T>1.0 | ±10% | ±0.01 |
Alumina Ceramic Substrate | |||
Material | Surface Roughness (μm) | ||
As Fired | Lapped | Polished | |
96% Al2O3 | Ra 0.2-0.75 | Ra 0.3-0.7 | Ra ≤0.05 |
99.6% Al2O3 | Ra 0.05-0.15 | Ra 0.1-0.5 | Ra ≤0.05 |
Alumina Ceramic Substrate | |
Hole Diameter (mm) | Standard Tolerance (mm) |
φ≤0.5 | 0.08 |
φ>0.5 | 0.2 |
Alumina Ceramic Substrate | |
Substrate Thickness (mm) | the Percentage of Laser Scribe Line Depth to Thickness (%) |
0.2-0.3 | 40%±5% |
0.3<T≤0.5 | 50%±3% |
0.5<T≤1.0 | 43%±3% |
1.2 | 55%±3% |
1.5 | 55%±3% |
2.0 | 55%+10% |
The scribing spot can be in different sizes. Generally there are small spot 0.03-0.04mm (Substrate Thickness≤0.5mm ) and large spot 0.08-0.1mm (Substrate Thickness>0.5mm), and the accuracy is ±0.01mm. |