as Fired Al2O3 Aluminum Oxide Ceramic Plate Bare Alumina Substrate

• Customization: Available
• Material: Alumina Ceramic
• Refractoriness (℃): 1200 < Refractoriness < 1400
• Model NO.: JJBP-0111-0002
• Shape: Rectangular or Square
• Forming Method: Tape Casting
• Purity of Material: 96%, 99.6% Alumina
• Features: High Mechanical Strength, Small Dielectric Loss
• Usage: Blank Ceramic Circuit Board
• Optional Color: White, Ivory, Pink, Black
• Density: Over 3.70g/cm3
• Standard Thickness: 0.25-2.0mm Available
• Thickness Tolerance: ±0.03/0.05mm (Depending on Thickness)
• Length and Width Tolerance: ±2mm
• Transport Package: Individual Package
• Specification: Max. up to 500mm x 500mm
• Trademark: JingHui
• Origin: China
• HS Code: 8547100000

Product Description

As Fired Al2O3 Aluminum Oxide Ceramic Plate Bare Alumina Substrate

Product Introduction

Alumina ceramic is a ceramic substrate material with good

comprehensive performance, accounting for 80% of the total ceramic

substrate materials, and is generally used in automotive electronics,

semiconductor lighting, electrical equipment and other fields.

Advantages of Alumina Ceramic Substrates

1. High Wear & Chemical Resistance.

2. Heat Resistant.

3. High Mechanical Strength.

4. Small Dielectric Loss.

5. Low Coefficient of Thermal Expansion (CTE).

6. High Light Reflection.

7. 0% Water Absorption
 

Applications

Manufacturing Capacity

1. Product Specification

Products of various specifications can be produced. The table below shows our standard thicknesses and sizes.

Alumina Ceramic Substrate
99.6% Al2O3
Thickness (mm)	Maximum Size (mm)			Shape			Molding Technique
	As Fired	Lapped	Polished	Rectangular	Square	Round
0.1-0.2		50.8	50.8		√	√	Tape Casting
0.25		114.3	114.3		√		Tape Casting
0.38	120	114.3	114.3		√		Tape Casting
0.5	120	114.3	114.3		√		Tape Casting
0.635	120	114.3	114.3		√		Tape Casting
Other special thicknesses within the thickness range of 0.1-0.635mm can be achieved by lapping.
96% Al2O3
Thickness (mm)	Maximum Size (mm)			Shape			Molding Technique
	As Fired	Lapped	Polished	Rectangular	Square	Round
0.25	120	114.3	114.3		√		Tape Casting
0.3	120	114.3	114.3		√		Tape Casting
0.38	140×190			√			Tape Casting
0.5	140×190			√			Tape Casting
0.635	140×190			√			Tape Casting
0.76	130×140			√			Tape Casting
0.8	130×140			√			Tape Casting
0.89	130×140			√			Tape Casting
1	280×240			√			Tape Casting
1.5	165×210			√			Tape Casting
2	500×500			√			Tape Casting
Other special thicknesses within the thickness range of 0.1-2.0mm can be achieved by lapping.

2. Material Properties
 

Alumina Ceramic Substrate
Item	Unit		96% Al2O3	99.6% Al2O3
Mechanical Properties
Color	/	/	White	Ivory
Density	Drainage Method	g/cm^3	≥3.70	≥3.95
Light Reflectivity	400nm/1mm	%	94	83
Flexural Strength	Three Point Bending	MPa	>350	>500
Fracture Toughness	Indentation Method	MPa·m^1/2	3.0	3.0
Vickers Hardness	Load 4.9N	GPa	14	16
Young's Modulus	Stretching Method	GPa	340	300
Water Absorption		%	0	0
Camber	/	Length‰	T≤0.3: ≤5‰, Others: ≤3‰	≤3‰
Thermal Properties
Max. Service Temperature (Non-loading)	/	ºC	1200	1400
CTE (Coefficient of Thermal Expansion)	20-800ºC	1×10^-6/ºC	7.8	7.9
Thermal Conductivity	25ºC	W/m·K	>24	>29
Thermal Shock Resistance	800ºC	≥10 Times	No Crack	No Crack
Specific Heat	25ºC	J/kg·k	750	780
Electrical Properties
Dielectric Constant	25ºC, 1MHz	/	9.4	9.8
Dielectric Loss Angle	25ºC, 1MHz	×10^-4	≤3	≤2
Volume Resistivity	25ºC	Ω·cm	≥10^14	≥10^14
Dielectric Strength	DC	KV/mm	≥15	≥15

Product Inspection
Jinghui Industry Ltd. is dedicated to producing high quality products. We do our best to ensure that any substrates supplied by Jinghui Industry Ltd. fully meet your performance expectations.