Zirconia Ceramics Zro2 Ceramic Tube Metallized by Electroless Nickel Plating

• Application: Refractory, Structure Ceramic, Industrial Ceramic
• Type: Ceramic Tube, Ceramic Parts
• Product Name: Zirconia Ceramic Tube with Metallization
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Customized
• Further Finishing Treatment: Machining, Glazing, etc
• Surface Metallization Process: Electroless Nickel Plating Method
• Feature: High Performance and Uniform Coating
• Material: Zirconia Ceramic
• Transport Package: Vacuum Packaging
• Trademark: JingHui
• Origin: China
• HS Code: 8547100000
• Production Capacity: 50000PCS/Month
• Package Size: 36.00cm * 20.00cm * 24.00cm
• Package Gross Weight: 10.000kg

Product Description

Zirconia Ceramics ZrO2 Ceramic Tube Metallized by Electroless Nickel Plating

Product Introduction

Introduction to Ceramic Structural Parts

Advanced ceramics can be divided into two categories according to their characteristics and uses: structural ceramics and functional ceramics. Structural ceramics are ceramics that can be used as engineering structural materials.

As can be seen from the figure below, the commonly used materials for structural ceramics are alumina, magnesia, silicon nitride, silicon carbide, zirconia and so on.

Product Features

Advantages of Zirconia Ceramic Structural Parts

1. It has excellent wear resistance, chemical corrosion resistance, high temperature resistance and anti-magnetic characteristics, and can be used in extremely harsh environments without polluting materials and the environment.

2. It has the characteristics of high toughness, high bending strength, excellent heat insulation performance, and the thermal expansion coefficient is close to that of steel.

Material Properties

Category	Property	Unit	ZrO2 (Y-TZP)	ZrO2 (MSZ)
Mechanical	Density	g/cm^3	≥6.0	≥5.72
	Water absorption	%	0	0
	Vickers hardness	HV	1300	1200
	Flexural strength	Mpa	≥ 1200	≥ 900
	Compressive strength	Mpa	≥ 1990	≥ 1750
	Fracture toughness	Mpam^1/2	6.5-8	11
Thermal	Max. Service temperature (non-loading)	ºC	1000	1200
	CTE (Coefficient of thermal expansion) 20-800ºC	1×10^-6/ºC	8.0-9.5	7.8-9.3
	Thermal shock	T (ºC)	≥ 300	≥ 300
	Thermal conductivity 25ºC	W/(m·k)	3	2
	Specific heat	1×10^3J/(kg·k)	0.46	0.46
Electrical	Volume resistivity 25ºC	ohm·cm	> 1×10^13	> 1×10^13
	300ºC		1×10^10	1×10^10
	500ºC		2×10^5	2×10^5
	Dielectric strength	KV/mm	17	9.4
	Dielectric constant (1Mhz)	(E)	29	28

Product Applications

Where are Ceramic Structural Parts Mainly Used?

Ceramic structural parts have very broad application prospects in semiconductor equipment, medical equipment, industrial equipment, wafer handling, electronic devices and other fields.

Production Process

Our product production is mainly divided into 3 steps, forming - finishing - metallization. The production flow chart is shown below.


What is Metallization of Ceramic Structural Parts?

Ceramic surface metallization combines the good mechanical properties of ceramics and the excellent electrical and thermal conductivity of metal materials. It not only has the excellent properties of high strength, high wear resistance, high temperature resistance and small thermal expansion coefficient of ceramic materials, but also has the plasticity and toughness properties of metal materials.

What are the Methods of Metallization of Ceramic Structural Parts?

Common methods include Electroless Nickel Plating Method, Silver Firing Method, Mo-Mn Method and W-Au Method. Each method has its own advantages and disadvantages, and it needs to be considered comprehensively in practical applications to decide which method to use.

Introduction to Electroless Nickel Plating Method

The following is the general process of the Electroless Nickel Plating method applied to the surface of the ceramic structural parts.
Advantages of Electroless Nickel Plating Method

1. Uniform coating and small pinholes.
2. Low cost, suitable for mass production.

Our Advantages

Jinghui has accumulated more than ten years of experience in the field of metallized ceramic structural parts, and can produce various specifications of metallized ceramic structural parts according to customers' drawings, with superior performance. Our customers are very recognized for our product quality.